Cybopache Posted January 16, 2006 Share Posted January 16, 2006 hey there? I have a problem , my machine wont recognice the mouse if it is plugged in to the USB slot.I have vers 1.1-2.0.USB keyboard support is enabled in bios.My joystick was no problem.So I have my board and mouse connected through PS/2.any clue anyone ?MY board is a MSI K7N2 Delta SeriesCybo Quote Link to comment Share on other sites More sharing options...
erjin999 Posted January 16, 2006 Share Posted January 16, 2006 Can you navigate the cmos/bios using the keyboard when it is connected Via USB ?Or run a boot CD that required the use of the keyboard ? The idea to see if it a hardware issue or a windows issue. Quote Link to comment Share on other sites More sharing options...
Cybopache Posted January 17, 2006 Author Share Posted January 17, 2006 do not respond.so its a windows problem.Will a repair do?cybo Quote Link to comment Share on other sites More sharing options...
erjin999 Posted January 17, 2006 Share Posted January 17, 2006 Well it should work in cmos screen, or on a boot CD, like a WinXP install CD. If it doesnt, it might be a hardware issue. Until it works with some program I dont think we can rule out hardware issue.Go to Control panel, system, hardware devices, right click on a device and choose Scan for changes, with the devices plugged in USB. See if that helps. Quote Link to comment Share on other sites More sharing options...
Cybopache Posted January 17, 2006 Author Share Posted January 17, 2006 hii haa!I`ve solved the problem. ;DI did uninstall the drivers, and installed them with my mouse in the USB port. 8)And WOLLA.Cybothx anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.