nemessith Posted June 12, 2000 Share Posted June 12, 2000 When I run Dune2 without sound, it works well. But in case I try it with sounds, it complains about the lack of memory. Now I've tried to solve it by creating a short-cut to program and editing its memory settings. This should work, but nope.I have also tried editing CONFIG.sys and AUROEXEC.bat without much success.What should I do to make it work? Quote Link to comment Share on other sites More sharing options...
varsh Posted June 18, 2000 Share Posted June 18, 2000 Use a boot disc and add the autoexec.bat and config.sys files.Try this:Autoexec.bat file:SET BLASTER=A220 I7 D1 H7 P330 T6 <--For sound (sets up your sound card)c:mouse <--for mouse (point to where your mouse.com is)C:©dproMSCDEX /D:MSCD001 /V <--for cdrom (point to where your cdrom drivers are)config.sys:DEVICE=C:WINDOWSHIMEM.SYS <--allows dos to use high memoryDEVICE=C:WINDOWSEMM386.EXE RAM 16368 (depending on your ram) <--gets dos using high memroyDOS=HIGH,UMB <--frees more conventional memoryDEVICE=C:CDPROVIDE-CDD.SYS /D:MSCD001 /P:1F0,14 /P:170,15 /P:1E8,12 /P:168,10 <--gets ur CD drive workingThese are my configs, and I can free up to 612K which runs Dune2 fine. If you have problems, then e-mail me at aaronvarshney@hotmail.com and put the topic as: dune2 help? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.