bin files

[deathhand]

hi.. i am about to burn a bin file to a disc using nero 6.6  whitch somthing i do for the first time.... so this is haw i do it:

1_ i open  burn image to disc

2_ i choose cue file

3_  i go to disc image or saved project and write it at maximum sepeed...

right or rong?? thank you

[Megashrap]

Verify the CUE-sheet and open it with Nero

Before doing anything else you have to verify that the path in the CUE-sheet is correct. A CUE-sheet is a plaintext file describing the structure and the location of the BIN-file. You can open up the .CUE -file using, for example, Notepad.

The file should look something like this:

FILE "IMAGE.BIN" BINARY

  TRACK 01 MODE1/2352

    INDEX 01 00:00:00

Usually the CUE-filename and the BIN-filename have the same body -- e.g. IMAGE. All you need to do is verify that there is no path information on the

FILE "IMAGE.BIN" BINARY

-line. Ie. it should not read e.g.

FILE "C:TEMPIMAGE.BIN" BINARY

If there is any path information on the line, just remove it so that you have just the name of the .BIN-file as in the example above. Also make sure that the name of the .BIN in the CUE-sheet is the same as the actual .BIN file you have on hard-disk.

Next load Nero Burning Rom and choose File, Burn Image....

Load the CUE-sheet in Nero

Choose the Files of Type: dropdown menu and select All Files *.*. Next just locate the .CUE file, select it and click Open. Make sure you select the .CUE -file, not the .BIN -file.

Burn the image

All you have to do then is choose the writing speed, select the Disc-At-Once Write Method, and click Write.

That's it! After a couple of minutes you'll have a CD with the BIN/CUE.