Canada Posted April 19, 2005 Share Posted April 19, 2005 I am a newbie and would like to make sure that I am not causing unwarrented delays due to servicing.You may be able to answer easily if it is true that no train will stop at a service tower or maintenance shed unless it needs too. Can anyone confirm If this is the answer?Otherwise, are there any delays possible if I build too many maintenance sheds? Through experimentation, I have been able to determine that trains probably stop at service towers if necessary.My trains currently stop a virtually any maintenance facility. I don't know if that is because I have managed to build just the right number of them in order to fill their needs or thatthey stop at every one. Of course, this delay reduces the amount paid for the cargo.Any comments and hints most welcome. Quote Link to comment Share on other sites More sharing options...
Casey Posted April 19, 2005 Share Posted April 19, 2005 They do not usually deliberately stop at every one. You must be spacing them very skillfully. I think they usually have tobe down to 40-50% left before they will stop.Others can correct this impression. Some have studies this very closely.All the bestWelcome to RRT3Casey Quote Link to comment Share on other sites More sharing options...
belbincolne Posted April 20, 2005 Share Posted April 20, 2005 The intention is that trains only stop when necessary. There have been bugs in some scenarios but I think you should discount this and carry on as you are doing as you seem to be getting the spacing right. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.